6.2
Advance Config:
Motion Detection Sensitivity:
sensitiveness
to trigger the motion detection.
Alarm Interval:
interval time for snapshot
Change WIFI network for the IP Camera.
Switch connection from wired to wireless.
Setup record time, resolution and file length.
Setup the Pan/Tilt rotation speed.
Setup the brightness (darkness) to trigger
IR-LED.
Setup the IP Camera date/time.
Change P2P access password.
Reboot the camera.
6.3
Switch Wired to Wireless
WIFI Config
enables you to switch the IP Camera connection from one network
to another, or wired to wireless (WIFI). Enter this interface, simply choose a WIFI
Network and input password and then disconnect net cable after 10 seconds.
Note:
Please make sure that the target WIFI Network works normally and its
password is correct.
