some other site that should not be shutdown.
3.
Connection Control:
The option “Auto Reconnect (always-on)” would keep the WAN
connection when the DHCP lease time expired.
4.
Host Name:
The name that shown on client list at server side.
5.
NAT disable:
If you enable this option, the device would not transfer the LAN IP to WAN
IP, it will behave like a pure router.
6.
Data Encapsulation:
Vc-MUX and LLC, these two options depend on your ISP setting.
7.
VPI and VCI, Schedule Type:
these values depend on your ISP setting.
8.
3G Auto-Backup:
If you connect 3G card and want to use it as backup WAN, enable this
option. And please also fill the value about “Checking wired-WAN alive”.
26