13
Dirt and residues can build up inside the Scanner
and affect image quality. Clean Scanner’s rollers
and lens periodically to get the best result.
Clean
•
Make sure the Cleaning Board and Cleaning Strip are
clean and free of dust before use.
•
Use a soft cloth dampened with alcohol to remove
dirt and stains from the Cleaning Board if necessary.
•
Using small drops of alcohol on the cotton side of
Cleaning Strip can help clean lens easily.
NOTES
Cleaning the Rollers
1. Open iScan Pro. Press the (Settings)
icon at the top-right corner, select the
Clean
setting.
2. Hold the foam strip of Cleaning Board facing
down, gently insert it into the Feed Slot.
3. Press the
Clean
button to begin the process.
The Cleaning Board will be pulled into the Scanner. Wait
until the Board is ejected with a 'Cleaning Done' message,
then press the
OK
button.
Mechanical sounds produced during the cleaning process
are normal.
Clean
Clean
