15
Calibrate
• Always clean Scanner’s rollers and lens first before
calibration. If cleaning rollers and lens did not
improve image quality, then perform calibration.
• If necessary, perform calibration few times until
image quality is improved.
• Make sure the Calibration Card is clean and free of
dust before use.
NOTES
1. Open iScan Pro. Press the (Settings) icon
at the top-right corner, select the
Calibrate
setting.
2. Remove the plastic foil on the Calibration
Card, insert it in the Feed Slot with the arrow
mark facing up and pointing to the Scanner.
3. Press the
Calibrate
button.
The Calibration Card
will be pulled into the scanner. Wait
until the Card
is ejected with a 'Calibration Done' message,
then Press the
OK
button.
Mechanical sounds produced during the calibrating process
are normal.
Calibrate
Calibrate
