User’s Guide Kona / Kona apparel cutting plotter
Basics
AP-75370 - Revision 1.1
51
3
3.7 Loading
media
3.7.1 Media
width
According to the size of your cutter, following media width can be cut.
3.7.2
Pressure roller positioning
As you notice, there are 2 pressure rollers on a Kona 760 and 3 pressure rollers on a Kona /
Kona apparel1400 or on a Kona / Kona apparel1650.
Positioning the pressure rollers on a Kona 760 is fairly easy. But on a Kona / Kona apparel
1400 or Kona / Kona apparel 1650 there are more possibilities.
This chapter explains the different possibilities.
In the picture below you find a schematic overview of the cutter. You can divide the picture in
different blocks. Please keep below picture in mind to know which item we discuss.
Type
Cutting range
Kona 760
Min. 104 mm
Max 760 mm
Kona 1400
Min. 104 mm
Max 1400 mm
Kona apparel 1400
Min. 104 mm
Max 1365 mm (smaller due to extra tool mounting assy)
Kona 1650
Min. 104 mm
Max. 1650 mm
Kona apparel 1650
Min. 104 mm
Max. 1615 mm (smaller due to extra tool mounting assy)
Pressure rolller 1
Pressure rolller 2
Pressure rolller 3
Media
Sensor 1
Sensor 2
different pressure roller positions
1
2
3
4
5
6
7
8
9
10
11
12
13
Schematic overview Kona / Kona apparel 1650
Note
The most important factor is that there is always 1 pressure roller in the middle
of the grit shaft (position 6 - 7 or 8 depending on the machine).
Summary of Contents for Kona 1400
