Rockhopper II series printers – Maintenance Manual
62
AP-74065, Rev. 1.2, 27/09/04
Step 7 :
Fix the plot platform calibre onto the plot platform.
1 = Fix plot platform caliber
2 = reachable screws of plot platform
Notes :
¾
Make sure the screws of the plot platform are reachable.
Step 8 :
Remove the screws of the plot platform.
1 = screws plot platform
Step 9 :
Pull upwards the plot platform calibre and so remove the plot platform with fixer.
Step 10 :
Remove the fixer.
Step 11 :
Degrease the plot platform.
Notes :
¾
Make sure the plate is cleaned properly. Dust, glue and other parts must be
removed.
Step 12 :
Stick the two fixer strips onto the plot platform.
Notes :
¾
Please make sure that there are no air bubbles under the heater strip. Air bubbles
below the heater strip could cause overheating of the heater strip.
Summary of Contents for Rockhopper II 2H
