Rockhopper II series printers – Maintenance Manual
63
AP-74065, Rev. 1.2, 27/09/04
Step 13 :
Stick the isolation tape onto the heater strips.
1 = plot platform
2 = fixer heater strip
3 = isolation tape
Step 14 :
Reinstall all parts in the opposite order of the removal procedure.
Notes :
¾
During reinstallation of the plate, make sure there are no cables stuck.
4.3.2.4. Replacing the heater (Heater A) on a Rockhopper II 4H printer
Before replacing the post fixer, make sure to have following items:
¾
50” model : Heater A 50
¾
64” model : Heater A 64
¾
87” model : Heater A 87
¾
2 x press plate
¾
Silicone
glue
To replace the heater on a Rockhopper II 4H printer, please follow the instructions mentioned below.
Step 1 :
Remove side cover L.
Step 2 :
Remove side cover R.
Step 3 :
Remove the front cover.
Step 4 :
Remove the Y rail cover.
Step 5 :
Remove the rear paper guide.
Step 6 :
Remove the heater strip.
Step 7 :
Degrease the plate.
Notes :
¾
Make sure the plate is cleaned properly. Dust, glue and other parts must be
removed.
Summary of Contents for Rockhopper II 2H
