Spitfire 100 Extreme series printers Users Guide
36
AP-75194 - Rev. 2.2
Step 17 :
Decide which kind of media measurement should be done. The following profiles are available.
Profiles
Settings
OFF
Roll LeftRight
(**)
Roll LeftRightTop
(**)
Roll to Roll
Measurement
None
(*)
Left
Right
Left
Right
Top
Left
Right
Take Up
Not used
Not used
Not used
Used
SlantCheck
No
Yes
Yes
Yes
Cutting media
possible?
Yes
Yes
Yes
Yes
(no auto cut)
Cut Test
No
No
Yes
No
Feeder speed
Low
Low
Low
Low
(*)
Align media to media guide dots on the print platform. Set width in Utility menu.
(**)
Use Roll LeftRight for flexible media and Roll LeftRightTop for rigid media. In the second option, a
media cut test will be performed which means scrolling back and forward of the media (backwards
feeding). When loading flexible media, it could get stuck into the media groove and can cause head
strikes.
Go to
step 20
when you have chosen for
OFF
-
Roll LeftRight
or
Roll LeftRightTop
. When you have chosen
for Roll to Roll, go to
step 18
Step 18 :
Forward the media until you can stick it to the core installed between the front roll units.
Make sure to have an equal tension on both sides of the media.
1
Roll unit
2
Empty core
3
Front swingbar
Summary of Contents for Spitfire 100 Extreme
