Spitfire 100 Extreme series printers Users Guide
55
AP-75194 - Rev. 2.2
Step 6 :
Insert
Spitfire Mild Solvent (Plus) ink Cassettes,
and Stabilizer liquid in case of 2x6, according to
the ink configuration label and charge for 3 minutes
Go to the Ink Manager Menu > Charge/Discharge, set the following parameters in this order.
Handle following order
Select ALL with [F2] key
Press F1 to select ALL heads
Select Charge with [F3] key
Press the F4 key to START cycle
Set 180 seconds with [F2] [F4] and press
ENTER
Step 7 :
A timer will start on the display.
When finished, the printer will go to its status screen automatically.
Step 8 :
Perform a NozzleCheck to be sure all nozzles are present.
Summary of Contents for Spitfire 100 Extreme
