4.7 Head Adjustment
VJ628XE-M-00
4.7.2 Head Alignment (Vertical Slant)
236
4
Start the printer in the self-diagnosis function mode and print the check patterns in "Head Slant: Slant 1."
㨀㧵㧼
Adjustment patterns of Head alignment (horizontal height) and (vertical) are printed when printing the adjustment pattern of "Head Slant: Slant1".
[Enter]
[Enter]
㹁㹦㹣㹡㹩ࠉ㸲㸸㸿㹢㹨㹳㹱㹲㹫㹣㹬㹲
[Enter]
㸿㹢㹨㹳㹱㹲㹫㹣㹬㹲ࠉ㹎㹰㹧㹬㹲
DIWHUSULQWLQJ
㸿㹢㹨㸬ࠉ㸲㸸㹆㹣㹟㹢㹑㹪㹟㹬㹲
㹆㹣㹟㹢㹑㹪㹟㹬㹲㸸㹑㹪㹟㹬㹲
Check Head Slant 2 (Vertical)
20mm
T I P
1 pass
ࠉ
Uni-D/Bi-D
PF:360dpi
ࠉ
CR:360dpi
for checking horizontal slant:
ࠉ
Nozzle A,C,E and G print the pattern. (CW/CCW printing)
ࠉ
320cps,VSD1,Small dot
According to the width of media,
following adjustment pattern is printed on three
places or less.
Printing direction
Paper feed direction
Origin side
Print Adjustment pattern
Check the Slant 2 (Vertical) at Connecting points
㸦
Refer to the following and an enlargement.
㸧
for checking Horizontal slant
for checking Vertical slant
Nozzle
CW
CW
CCW
CCW
CW
CCW
(1) Check wheter Connecting
points are one row.
In
͆JRRG͇
, No need for adjustments.
In “
SRRU͇
, it adjusts, respectively and
be set to “
JRRG
”.
Refer to the following page for
the adjustment method.
Connecting point (Enlargement)
㸸
Ex. Black
state of
Vertical Slant
The connecting points
of CW printing and
CCW printing are
printed vertically in
a straight line.
The lines of CW
printing and CCW
printing are not straight.
The lines of CW
printing and CCW
printing are not straight.
state of
Vertical Slant
state of
Vertical Slant
good
poor
poor