wards. This gives the child a greater field of view.
· The support (6) must be folded over before placing the
baby in the baby carrier, wit hits back to you. Lock
the straps as described above. You can change the
size with the top seal by pulling the straps (7) until
the child is lying against you comfortably.
· Your baby may not lean forward!
· Smaller children must have both arms through the
arm holes. (diag. F)
· The arms of larger children go over the side of the
head support.
lifting the baby out of the baby carrier (diag. G)
when the baby is awake (diag. G1)
· Opening the seal at the side and unclicking the head
support allows you to lift the baby out of the Car-
ryme with ease.
when the baby is asleep (diag. G2)
· When the baby is asleep, unclick the top seal of the
head support on both sides. Hold your baby firmly
with one hand while you open the sides with the
other hand. The front of the baby carrier falls for-
ward. You can now put the baby down while it con-
tinues to sleep.
· This is how you can transfer the child to daddy,
grandma, etc.
tips for use
general
· Only use original Mutsy accessories.
· Do not change the product. Contact your supplier or im-
porter if you have any complaints.
· Only use the carrier for one child at a time.
· All front/back descriptions in the text assume that the
user is wearing the baby carrier as depicted in diag.
A.
warnings
· Read these instructions for use carefully and keep
them as reference material. Failing to comply with
these instructions for use may seriously endanger
your child.
· You are responsible for the safety of your child.
· The baby carrier is intended to be worn by adults.
· The Carryme must be worn at the front and never at
the back!
· The baby carrier must be used while, walking, sit-
ting and standing.
· Do not use the Carryme when you are cooking or
doing other activities that may endanger your
child.
English
11