19
tion points (L)
! Place the adapter marked R on the right-hand
side, and place the adapter marked L on the
left-hand side.
· Place the Traveller on the adapters in such a
way that you can see your child (M1)
! Turn the carrier bar towards the head of the
seat, so that it lies flat (M2). The Traveller has
now been secured onto the frame.
Removing the Traveller
· Put the carrier bar in a vertical position. The
Traveller can now be removed. If you also wish
to remove the adapter set from the frame, push
the tabs underneath the connection points, and
slide the adapters diagonally upwards (L).
Securing your baby
· Put your baby in the car seat and secure the
belt by inserting the two connection points 1
and 2 into the buckle 3. If you hear a click, the
belt is secured (D).
· Tighten the belt by pulling at the end of the belt
(F1); push the button to loosen the belt (F2).
! The belts must be tightened smoothly and
should not be twisted.
· Push the red button on the buckle to release
your baby.
Adjusting the belt to the correct shoulder height (G)
· The back of the car seat has 2 slots that enable
you to adjust the height of the shoulder strap in
accordance with your baby’s length.
· In order to adjust the height of the shoulder
strap, undo the two ends 1 and 2 from 3. Now
select the correct slots based on the length of
your baby and stick the two ends of the strap
through these slots. Then secure the ends 1
and 2 onto 3.
! The safety belts must be adjusted in such a
way that they fit the baby snugly.
Installation of the 2 belt protectors and a buckle
protector (E)
· Undo the buckle and slide the protectors across
the belt. Pull the leg part through the opening
in the buckle protector.
Adjusting the carrier bar (H)
· The bar can be set to 3 different positions:
1 in-car position
2 carrying position
3 rocking position
· If you want to adjust the position, press the 2
buttons on the sides of the carrier bar.
Adjusting the back of the seat (I)
· Move the adjust button up as indicated in the
illustration and select the desired position. In
the car, bear in mind the different positions in
relation the weight of your baby:
· Lying position and mid position: You can opt
English
Summary of Contents for traveller
