2
USER MANUAL
1. Lay the seat flat on the floor, face down.
2a. Insert 1 x Top Leg into the designated space on the underside
of the Seat Base.
2b. Secure with 1 x 20mm Leg Bolts.
2c. Repeat for remaining 3 x Top Legs.
3a. Insert 1 x Bo�om Leg into the designated space connected to a Top Leg.
3b. Repeat for remaining 3 x Bo�om Legs.
4a. Align one end of the Leg Cross Brace with the designated space located
on the inside of the full leg assembly.
Ensure the curve in the bracing is angled downward.
4b. Secure with 1 x 25 mm Leg Bracing Bolt.
4c. Repeat for the remaining 3 x Leg Cross Brace ends.
5. Flip the chair over.
6. Insert 2 x Footrest Bars into the footrest slots at the front of the chair.
7. Insert 1 x Footrest Adjuster into the desired slot. Push down to secure into place.
I ASSEMBLY IN HIGH CHAIR MODE
