HDMI/HDBT 1x4 Splitter
Installation & Operation Manual
© MuxLab Inc. 2016
5
One (1) Power Cord
Four (4) Plastic Feet
One (1) User Manual
Please verify that the product and the accessories are all included; if not, please
contact your dealer.
Specification
2.
Environment
HDMI 1.4, HDCP 1.4
Devices
DVD, projectors, monitors, TV, PC, laptops, servers
supporting HDMI
Compatibility
Compatible with MuxLab HDBT products
Transmission
Transparent to the user
Video Bandwidth
10.2Gbps
Maximum
Pixel
Clock
297Mhz
Video Resolution
VESA and SMPTE 480p to 2160p (4K) With 3D
Bit depth: 16, 20, 24
Signal
HDMI 1.4 protocol and HDCP 1.4
Audio
PCM, Dolby TrueHD, DTS-HD Master Audio
Maximum Distance
Based on a maximum
length of 6.6ft. (2m) of
HDMI cable per end.
Cat 5e/6:
230ft (70 m) up to 1080p
131ft (40m) up to 4K/30Hz
Note:
When installed in an electrically noisy environment, an STP
cable must be used. Also, cross-connections reduce the effective
distance depending on the grade of twisted pair cable used.
Cable
One (1) Cat 5e/6 or better twisted pair cable required
Compatible
Receiver
500451-RX (no Serial Port)
500454-RX (with Serial Port)
Control
RS232 & IR Pass thought
RS232 port ID selectable for cascading
Connectors
Two (2) HDMI connectors for HDMI Input & Output
Four (4) RJ45 shielded connectors for HDBT
Three (3) 3.5mm Jacks; for IR input, output & cascade
Two (2) 3-pin terminal block (3.81 mm) for RS232
One (1) USB Port for firmware upgrade
