_________________________________________________ MuxMeet Share Base-1 Operation Manual
© MuxLab Inc. 2022 Page 54 94-000977-A/SE-000977-A
connect to the access-point of MuxMeet Share Base-1, while
Staff
can also connect to the Base unit via Wi-Fi, or via a LAN
connection to their corporate network.
Stand-Alone Connection
The internal Wi-Fi access Point of MuxMeet Share Base-1 is active
. The Dongle is paired directly to it. Guest and Staff
use the internal Wi-Fi access point of Base unit to present with all their units.
No Internet access is required.
Recommended Environment
This option is best for temporary operation, small installations, and rooms without network access or networks that do not
allow network access for guests.
Under this mode, the Dongle will be automatically paired to the Base unit Wi-Fi hotspot when plugging Dongle to the Base unit
USB port for pairing.
You can start using MuxMeet Share Base-1 in this mode without any other wireless network configuration.
Set up Wi-Fi access point
Set-up Wi-Fi access point, Frequency, Channel, Password.
