_________________________________________________ MuxMeet Share Base-1 Operation Manual
© MuxLab Inc. 2022 Page 55 94-000977-A/SE-000977-A
•
Frequency
: Click to select 2.4 GHz, or 5 GHz Wi-Fi frequency. Default is 5 GHz.
•
Channel
: Click to select the Wi-Fi channel. Default is 5 GHz, Auto.
If the
Wi-Fi
channel is changed, no new pairing of the Dongle is necessary.
2.4 GHz frequency band
: channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
5 GHz frequency band
: no need to choose the 5G channel, as the system will choose a proper channel automatically.
Default is 5 GHz, channel: Auto.
Default channel (USA & Canada):
36,40,44,48 or 149,153,157, 161. Four channels will be opened at the same time, system will
automatically choose a proper channel from them.
Default channel (Europe):
36,40,44,48.
Default channel (China):
149,153,157,161.
•
Password
: Click in the input field to fill out the appropriate password with length of
8 characters.
Click “Next step” to edit or change Guest network SSID and STAFF network SSID.
This information will be shown on the
MuxMeet Home Screen.
Click “Submit settings” to finish configuration.
After the above, please re-pair Dongle with the Base unit.
There are 3 ways of connecting the Base unit to the
Internet through Base unit in “Wireless Direct Mode”.
•
Allow Internet access (bridging) via LAN1: able to connect to Internet if LAN1 port is available.
•
Allow Internet access (bridging) via LAN2: able to connect to Internet if LAN2 port is available.
•
Disable Internet access: cannot be on the Internet if choosing this mode. (Due to safety concerns)
