HDMI 2.0/3G-SDI Signal Generator
© MuxLab Inc. 2017 94-000850-A / SE-000850-A
Page 11
4.
The Signal Generator may be controlled via the Front Panel
by using the ergonomic push buttons.
5.
Be sure the HDMI Out LED is On. If this LED is Off, but the SDI
Out LED is On, then press the ‘Select’ button to change to
HDMI mode.
For SDI applications: Follow the same procedure as above,
but select SDI mode, use SDI coax cable of appropriate
grade, and ensure that the SDI Out LED is On. If this LED is
Off, but the HDMI Out LED is On, then press the ‘Select’
button to change to SDI mode.
6.
Menu mode:
a)
The ‘Enter’ key can operate as a MENU or Enter (Confirm)
function key.
b)
Press ‘Enter’ to activate Menu mode and display the
various available menus. Menu mode will turn off
automatically after 5 seconds of no input activity.
c)
Press ‘Cancel’ to turn off Menu mode.
d)
While in Menu mode the user can scroll through the
various available menus.
