SDI to USB3.0 Video Capture & Streamer
Installation Guide
© MuxLab Inc. 2020
7
3. Panel Description
1. USB OUT:
Connect to a USB host port on a Windows PC, Laptop, Notebook,
MAC, etc.
2. STEREO AUDIO IN:
Connect to an analog 2CH audio source
3. AUDIO SWITCH:
[Analog position] Audio will be captured from the 2CH analog audio input port
[SDI position] Audio will be captured from SDI input signal
4. SDI IN:
Connect to a 3G/HD/SD-SDI source
5. LED INDICATOR:
Input signal indicator LED
6. SDI LOOP OUT:
Connect to a 3G/HD/SD-SDI display
Note: Once all connections are made the capture device may be used. Also see
the application diagram in the following section concerning connectivity.