07
8. Care & Storage
•Ensure your scooter is turned OFF.
•Clean your scooter using a damp cloth and non-abrasive cleaners only.
•If you scratch any plastic parts of your scooter, you can gently rub with sandpaper to help
smooth the surface.
•Do not use a pressure washer on any part of the scooter.
•Store your scooter in a secure, dry and sheltered area and out of direct sunlight.
•Do not leave your scooter outside, in the rain or in damp areas.
WARNING : Do not use alcohol, petrol,kerosene or other corrosive solutions,
volatile chemical solvents to clean the scooter.
Otherwise, it will cause serious damage to the scooter body and can disrupt a
structure of internal elements.
Ensure power socket is covered at all times to avoid water/moisture/dirt
penetrating the socket.
Clean and store Scooter
Adjusting your disc brake
Maintenance of Your Scooter`s Battery
• Do not use batteries from other brands in order to avoid a dangerous situation;
• Do not open or disassemble the battery to prevent electric shock.
Avoid contact with metal objects to prevent an occurrence of a short circuit.
Otherwise, the battery may have malfunction or can injure the user;
• It is recommended to use an AC adapter that comes in original configuration of the device
to prevent an occurrence of an accident or fire of the vehicle;
• Improper disposal of used batteries and accumulators is the cause of severe environmental pollution.
Please dispose of batteries in accordance with local laws.
Please do not dispose of batteries together with food waste.
Let’s help protect the environment together!
• After each use of the scooter, charge the battery to prolong its service life.
• Do not store the battery with depleted charge.
• Do not store the scooter battery in a temperature that above 50 degrees or below -20 degrees.
• Do not leave the battery near fire.
These actions may deteriorate the battery by overheating and can even cause fire.
Please charge your scooter within the first 30 days of purchase, and ensure it is charged at least every 60 days if not in use.
This will help prolong the life of your battery.
1: To tighten brake/remove slack from brake lever, use 5mm allen key supplied to loosen brake cable bolt
shown below. While loose, pull cable through the caliper and slightly close caliper arms together. To retighten
5mm bolt. To loosen brake, do the exact opposite.
