10
Ensure that the Ethernet connection
terminal block is fully screwed in.
Do not twist or damage the Ethernet
cable.
Do not use damaged Ethernet cables
or plugs.
Do not use the standard power cord.
➍
Connect the Data port on your PoE injec-
tor to the Ethernet port on your computer
or router.
➎
Switch on your PoE injector.
SWITCHING OFF THE TERMINAL
To switch off the terminal
•
Standard configuration: unplug the power
cord by unscrewing the screws on the 2-
point terminal block.
•
PoE configuration: switch off the PoE injec-
tor by unplugging its power cord.
CONFIGURING THE TERMINAL
Follow the instructions below to configure
and test the 4G connectivity.
Your computer must be configured for
DHCP. For instructions on DHCP configura-
tion, please refer to your computer docu-
mentation or see the Appendix
"
Configuring
your computer
for DHCP
"
.
➊
Switch your computer on if it is off.
The terminal will automatically assign an
IP address to your computer.
➋
Type the URL http://192.168.1.1
into the
address field of a browser such as Microsoft
Internet Explorer, Google Chrome or Mozilla
Firefox.
➌
The following login box will appear:
Type in admin as the user name and admin as
the password, all in lower case.
Click the Login button to proceed to the termi-
nal’s administration interface.
You can configure your terminal to connect to
Internet through a 4G or Wi-Fi connection.
