6 to 11
PERIODIC: Remove open burners and clean with warm water and wire brush. Make sure the ports are not
clogged. Check valves and lubricate, if necessary. Consult your service agency or local Gas Company.
STAINLESS STEEL PARTS
Do not use steel wool, abrasive clothes, cleansers or powders to clean stainless steel surfaces. All stainless steel
parts should be wiped regularly with hot soapy water during the day and a stainless steel liquid cleaner at the
end of the day. To remove encrusted materials, soak in hot water to loosen the material, and then use a wood
or nylon scraper.
Contact the factory, factory representative or a local service company to perform repairs.
INSTALLATION WALL SUPPORT
1. Place the support to the wall
2. Put the equipment and use the screw to fasten the equipment to the support.
