21
EN
M1.3.BT200-BT200M.NLFREN 13112018
2 Safety warning labels
1. Don’t put hands under the mounting/demounting head during
operation.
2. Don’t put hands between the jaws during operation.
3. Don’t put hands inside the tyre bead when demounting the tyre.
4. Make sure and the system is equipped with a good grounding
circuit.
5. Don’t put feet between the bead breaker shovel and the body
during operation.
CAUTION!
When the security warning labels are defaced or off,
please recovery them in time!
Do not allow to operate when the security warning
labels are missed or imperfect. Do not allow to set
any objects to obscure the security warning labels.
Clients can self-set the warning labels (as right
picture shows) at any necessary positions.
.1211 . V201301
- 1
–
Warning
This instruction manual is important for the machine, please read carefully before installation and use; also it is
important for safe use and machine maintenance of machine. Please keep this manual properly in order to further
maintenance of the machine.
1. Introduction:
Application Range: The semi-automatic tyre changer is especially designed for demounting / mounting tyres from
wheel rims.
Caution
：
Please use the machine only for purpose for
which it is designed, don't use it for other purposes.
Manufacturer shall not be liable for any damage or
injury caused by failure to comply with these regulations.
Safety regulation: Use of this machine is especially
reserved to trained and qualified professional persons,
those who already read the introduction manual carefully,
or someone have the experience for operating similar
machinery. Any changes and beyond the scope of use on
this machine without manufacturer
’
s permission or do not
according to the manual, may cause the malfunction and
damage to machine, manufacturer can cancel warranty
coverage for above. If some parts are damaged due to
some reason, please replace them according to the spare
parts list. (Attention: warranty is one year after
manufactures’
delivery date; warranty excludes the
easy-broken parts).
2. Safety Warnings:
01
Don’t put hands under
the Mounting/demounting head during operation;
0
2 Don’t put hands
between the jaws during operation;
0
3 Don’t put hands in
side the tyre bead when demounting the tyre;
04 Make sure and to check the system is equipped with a good grounding circuit;
0
5 Don’t put feet
between the Bead Breaker shovel and the body during operation;
Security warning labels
Caution:
When the security warning labels are defaced or off, please recovery them in time!
Do not allow to operate when the security warning labels are missed or imperfect.
Do not allow to set any objects to obscure the security warning labels
.
Clients can self-set the warning labels (as right picture show) at any necessary positions.
3 Technical data
Model
BT200
BT200M
Swing arm
Pneumatic clamping
External locking rim dimensions
10 - 21 ‘‘
Internal locking rim dimensions
12 - 24 ‘‘
Maximum wheel diameter
1040 mm / 41’’
Maximum wheel width
355 mm / 14’’
Working pressure
8 bar
Power supply
3 x 400 V
230 V
Motor power
0.75 kW
Maximum rotating torque turntable
1078 Nm
Noise level
75 dB (A)
Overall dimensions
960 x 760 x 920 mm
Net weight
207 kg
Remark
Rim dimensions defined at above table are based on the iron wheel rims. Aluminium rims are thicker than the iron wheel rims,
so here above rim dimensions are just for the reference.
copyrighted
document
- all
rights
reserved
by
FBC
