21
PPH75B - NLFREN - v1.1 - 29052017
EN
3 Prepare before using
3.1 Transport
The units are generally too heavy to be moved by hand. Therefore, use the correct transport and lifting equipment. The
weights and dimensions of this machine (unit) are shown on the label in clause 3.
During moving the machine, please make sure to use the proper lifting equipment and follow the instructions as follows.
3.2 Working area
Users should provide enough space for the equipment and the environment should be clean, non-flammable, corrosive
and dust free.
A working area of 1,000 mm is to be kept free both in front of and behind the machine while it is in operation so that it
is always easily accessible.
8
2.6 Fixed guards
3.Prepare before using
3.1 Transport
The units are generally too heavy to be moved by hand. Therefore, use the correct
transport and lifting equipment. The weights and dimensions of this machine (unit) are
shown on the label in clause 2.
During moving the machine, please make sure to use the proper lifting equipment and
follow the instructions as follows.
Hydraulic part
3.2 Working Area Conditions
Users should provide enough space for the equipment and the environment should be
clean, non-flammable, corrosive and dust free.
A working area of 1,000mm is to be kept free both in front of and behind the machine while
it is in operation so that it is always easily accessible.
3.3 Unpacking & Check
3.3 Unpacking and check
• When open the packing, please make sure to use the proper tools, wear protective cloth, gloves, safety helmet
• Make sure that the product and parts in box should be complete and identical with the part list. If not, please contact
the dealer immediately.
•
The packaging of these machines consists of PVC film and polywood case. The proper disposal of the packaging is
the responsibility of the customer.
copyrighted
document
- all
rights
reserved
by
FBC
