7
Note: Interfaces used in KNX Secure installations must know the type of access to
the corresponding Group Associations. To allow communication for the
regarded interface, the combination of PA/IA + GA is stored as position
information in relevant devices. GAs are added to coupler filter tables by ETS
automatically.
Note: Visualization of KNX Secure devices can only be done with using secured
Group Associations.
3 State of Delivery
3.1 General Factory Setting
3.2 Technical Datasheet
General
Product
KNX USB Interface
Order Number
KSI-01U
Application
-----
ETS Name
KNX USB-Interface
Physical Address
Marking/Design
Current consumption
LED Display elements
Mounting
Protection type
Pollution degree
Protection class
Overvoltage category
Approbation
Housing colour
Housing dimensions
Voltage supply
Standards
CE Marking
Connections
0.2.255
KSC-01U
KNX TP: < 5mA and USB: < 20 mA
State (USB and KNX)
35 mm top-hat rail (TH35) according to IEC60715
IP20 according to IEC60529
2 according to IEC60664-1
III according to IEC61140
III according to IEC60664-1
KNX-certified according to ISO/IEC14543-3
Plastic PA66 housing, grey
H = 90 mm, W = 36 mm (2 modules), D = 71 mm
KNX: 21…30V DC (SELV)
USB: 5 V DC (SELV)
EN50491-5-1, EN50491-5-2, EN50491-5-3,
EN50581,EN61000-6-2, EN61000-6-3
In compliance with directives 2014/35/EU (LVD),
2014/30/EU(EMC), 2011/65/EU (RoHS)
USB:USB2.0 connector (Type B, female)
KNX TP line:KNX TP connector (red/black),
screwless, for single-core cable Ø 0.6…0.8 mm
