Starting
Page
10
LED flashlight button: press the button to turn the
flashlight in the front of the unit for ease of use in night.
Keep in mind that working with flashlight increases the
power consumption and therefore less working hours.
Volume button: press the button to select the sound level
Power button: Press and hold to turn on the unit after
switching the power switch ON.
Ground calibration key: With this key, the user can adjust
the unit to adapt to the terrain and environment in which
the device operates. The device gives the normal and
stable adjustment of the search tool for better results.
Note: We may start searching in an area where the device
is issuing a signal in general
We press the calibrate key once and wait for the signal to
stabilize
If this continues to sound in any direction we press the key
again until we get a stable result and then go to the search
area to determine the targets.
There are three levels to adjust the calibration if the device
is not calibrated. You are located in areas where there is
high noise from high voltage, etc.
