background image

IMPORTANT!

This Step-by-Step guide should be given to the customer

after installation and demonstration

.

Instantaneous Electric Shower

Installation Instructions

SERVICE POLICY

In the event of you needing to contact the MX Group Customer Service Department, 
the following procedure should be followed:-

If a service call is booked, you or a representative must be present 
during the Engineers visit.

Before telephoning the MX Group Customer Service Department you 
should ensure that you have the model number, power rating, serial 
number and date of purchase.

The MX Group Customer Service Department  will be able to inform you
whether the fault can be rectified by the provision of a replacement 
part or an on site visit by a Qualified Service Engineer.

If the product is no longer covered by the Guarantee, a charge will 
be made for the  site visit and for any parts supplied.

A charge will be made where a call under the terms of the guarantee 
has been booked and a failure was not product related, or an engineer 
arrives and is not able to gain access.

1

1

2

3

4

5

Customer Service Department

01489 773126

9.00 am - 5.00 pm Monday to Friday

Summary of Contents for Neptune Showers Solo







Reviews: