page 6
Installing in a vehicle which has ISOFIX anchor points
(cont)
Lock the two ISOFIX connectors into the
ISOFIX anchorage points.
The ISOFIX indicator (A) will turn green
when the connectors are locked to the
anchorage points.
Pull the seat forward to check both
connectors are firmly locked in place.
Pull and hold the ISOFIX
connector lever (B), and
push the child car seat into
the vehicle seat, release the
lever when there is no space
between the child car seat
back and the vehicle seat.
Adjust the support leg until
the foot reaches the floor of
your vehicle. Do not continue
turning the adjuster after the
foot of the leg reaches the
floor, as this will raise the front of
the child seat (C).
The child car seat is now fitted.
Go to page 10, “Placing your
child in the child car seat”.
WARNING: The child car seat should always be either strapped in using the vehicle’s
seatbelt or locked in place using the ISOFIX system, whether a child is seated in the
child seat or not.
click
A
B
C