page 13
5. Attach the booster seat to a chair:
Ensure the backrest is in an upright position and that both booster straps have been
pulled out from their storage spaces and correctly prepared as described on page 12.
Place the booster seat on a suitable adult chair. Wrap the two backrest straps (F)
around the back of the chair (G) and fasten the buckle.
Wrap the base straps (H) under the base of the chair (I) and fasten the buckle.
6. Tighten the seat straps:
With the straps fastened pull the backrest strap (J) to tighten both the backrest strap
and base strap simultaneously. Once the straps are tight, tidy the end of the backrest
strap away in the clip (K).
WARNING! Ensure the booster seat is firmly attached before putting your child in the seat.
Using the booster seat
(continued)
G
H
I
F
click
WARNING! Only use the booster seat on an adult chair when the booster backrest is in
an upright position (not reclined).
The adult’s chair should have a seat depth of more than 330mm, a width of more than
460mm and a backrest height greater than 300mm.
J
K
