page 6
Assembling the seat unit backrest
(continued)
5. With the seat folded, feed the
backrest tubing (E) into the pocket on
the backrest cover, ensuring the two
shoulder straps (F) are not twisted around
one another.
E
F
6. Place the two ends of the backrest
frame (G) onto the two ends of the seat
base frame (H) ensuring both spring pins
click into place.
Top Tip:
Angle the backrest frame (G)
slightly towards the front of the highchair
as you begin connecting the tubing.
IMPORTANT: The backrest frame will not fit
onto the seat base frame if the highchair
is unfolded.
G
H
G
click
click
G
H
