page 7
Attaching the tray
1. Slot the two plastic spacers (A) over the
two plastic parts on the tray frame.
2. With the tray turned upside down place
the tray frame (complete with spacers)
onto the tray as shown. Secure the tray to
the tray frame using four screws.
IMPORTANT: DO NOT overtighten the
screws.
4. Push the two ends of the tray frame
into the attachment points on each side
of the seat unit, ensuring the spring pins
(D) click into place.
3. Holding the back of the seat frame (A)
and the front bar (B), open the seat unit
out ensuring it clicks into place.
Wrap the seat strap (C) over the front bar
(B) and fasten the two press studs.
A
A
D
click
click
B
A
C
