page 9
Attaching the legs
1. Attach the feet to the front and rear
leg tubing, ensuring the straight edge
(A) on each foot goes against the floor.
Secure each foot using one screw.
IMPORTANT: DO NOT overtighten the
screws.
2. Place the seat unit upside down on the
floor.
Insert the rear leg tubing (the wider of the
two sets of leg tubing) into the back legs
of the seat unit. Press in the spring pins
and push the leg tubing in till the spring
pins click into place.
Repeat the above steps for fitting the
front legs.
Keep fingers clear of all potential pinch points during assembly.
click
click
A
