Charging
The
Trio3in1
can be used with the adapter supplied
with the unit after being plugged into an electric outlet.
It may also be used without the adapter when it is fully
charged. Be sure to fully charge the unit for 16 hours prior
to using the unit without the cord for the first time. It is
recommended that you recharge your unit after each use.
Getting the Best Results
To reduce discomfort and prevent irriatation or ingrown
hairs, it is recommended to exfoliate the area prior to hair
removal. Take a warm bath or shower to open up pores
and use a loofah sponge or exfoliating cream to remove
dead skin. Dry skin thoroughly before using the
Trio3in1
.
Using the Trio3in1
Use your
Trio3in1
in a location that has a comfortable
temperature to avoid perspiration. Make sure your skin is
clean, dry and free from moisturizing cream or oil. If the unit
is fully charged, remove the adapter from the plug on the
bottom of the unit for cordless operation. If your unit is not
charged, insert the adapter into the plug on the bottom of
the unit and plug the adapter into an electrical outlet. Place
the desired head onto the unit and press until it snaps into
place. Change heads by pressing the release button.
Getting
Started
