FEATURE_______________________________________________
* Power Up Segment Test
When first turning the unit on, all segments of the display will appear as shown below. This display will
remain for approximately 2 seconds and then reset to 0.
1:8:8:8:8
*
Overload
When an applied load exceeds the capacity. "EEEE" will appear on the display. Remove the excessive
load immediately!
!Remember: You can permanently damage the scale by overloading it!
*
Negative Value
Any tarred value or a value left in memory will be displayed as a negative number once all weight is
removed from the unit. Press tare to re-Zero the unit.
* Auto off
An auto shut off feature is provided to conserve battery power. The unit will automatically turn off after
approximately 3 minutes of inactivity.
*Stable Indicator
There is a stable indicator that appears on the left side of the LCD whenever the scale is stable and at
Zero
KEY PAD FUNCTIONS
*
UNIT (the left key)
Unit (mode) selection: Press and hold the left key to change weight unit You can select g (grams), oz
(ounces), dwt (pennyweight) or ct (carats).
*
ON/OFF
Press this key to turn unit on. Once the unit is on, press and hold the same key for 5 seconds to turn the
scale off
* Special Tray/Cover
The protective cover of the Z is designed to also be used as a platform expansion tray. Simply remove the
cover, turn it upside-down, and place it on the scale’s weighing platform. Now turn the scale ON and the
scale will automatically TARE (zero) itself with the tray on the scale.(if this does not work properly, you
can turn the scale ON, then place the upside down cover on the tray and press the TARE key) This is
perfect for weighing loose objects, gunpowder, gems, Chinese herbs and more.
Please keep the protective cover installed when the scale is not in use (it will help protect the scale from
possible damage)
*
ZERO (TARE)
