Durascale precision digital pocket scale manual
MBS-2010 Babyscale
Manual & Calibration
Palmscale (all) Manual
and Calibration Guide
Palmscale 1.0 and 2.0
Advanced Guide and
Repair
Palmscale 3.0 and 4.0
Advanced Guide and
Repair
Palmscale 5.0 Advanced
Programming and Repair
Guide
Phoenix Body Fat Scale
Common Questions
Proscale Manual &
troubleshooting
Touchscale Advanced
Programming
Triple Beam Manual &
Troubleshooting
* The tray of the scale can also be used as a weighing cup or bowl. Simply turn it upside down and place it on
the weighing platform.
* Avoid lengthy exposure to extreme heat or cold, your scale works best when operated at normal room
temperature.
Always allow the unit to acclimate to a normal room temperature for at least one hour
before use.
* Allow sufficient warm up time. Turn the scale On and wait several seconds to give the internal components a
chance to stabilize before weighing.
* The cleaner the environment the better. Dust, dirt, moisture, vibration, air currents and proximity to other
electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale. Only use on
a stable, vibration free surface
* Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may permanently damage the internal sensor and void your
warranty.
* Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and MUST BE
HANDLED WITH EXTREME CARE.
*
IMPORTANT ADVICE: Place the item to be weighed on the platform, after the stable weight is
displayed remove the item immediately. This will prolong the longevity and accuracy of this weighing
instrument.
.** These electronic scale are precision instruments. Do not operate near an in-use cell phone, cordless phone,
radio, computer or other electronic device. These devices emit RF and can cause unstable scale readings. If
your scale ever performs poorly, try moving the scale to a different room or location. This is a very precise
scale - the display may seem to wander or jump when weighing. This is due to air currents or vibrations. Stable
weighing is achieved when the display remains fixed for 3 seconds.
FEATURE_______________________________________________
* Power Up Segment Test & Stabilization
When first turning the unit on, the segments of the display will appear as shown below. This display will remain
for approximately
5 seconds
and then reset to 0.
OPERATION____________________________________________________
When all segments flash on the display, this indicates the batteries are low
Battery Replacement:
DO NOT USE EXCESSIVE FORCE & DO NOT PRESS ON THE TRAY!!!
1) Four "AAA" size alkaline batteries are required.
2) To install batteries:
a) Release both battery covers by holding the tab and pulling out-wards.
b) Place batteries into battery compartment aligned correctly.
c) Replace battery cover.
3) The scale is now ready for battery operation.
http://myweigh.com/support_manual_durascale.html (2 of 6)7/25/2006 8:20:58 PM
