KEYPAD FUNCTIONS
Mode Selection: Press the key once to change weighing unit (g, oz, ozt, dwt)
Calibration: Depress this key for five seconds to begin calibration.
On: Press this key to turn unit on.
Tare: Press tare to reset the scale to zero. Tare can be usedfor eliminating the weight value of a container or
the integratedsliding tray. Turn the scale on, Place an empty container or the trayon the scale and press TARE. The
scale will reset to 0.0, then placethe items to be weighed in the container and the correct weight of theitems will
appear on the display. Note: When al weight areremoved from the weighing tray, the tared value of a container will
bedisplayed as a negative number. Depress tare again to return thedisplay to 0.0.
OFF:Press and release to turn off the scale
Auto Off: An auto shut off feature is provided to conservebattery power. The unit will automatically turn off after
approximately2 minutes of inactivity.
BATTERY OPERATION
If your scale ever reads "LO", performs slowly or inaccurately, pleasereplace the batteries. Be sure the batteries
are tightly in theircompartment and are making contact with the battery prongs. BE CAREFULNOT to push down
on the scales platform when replacing the batteries!
1. Three AAA size ALKALINE batteries are required.
2. Release the battery cover by sliding the battery cover off.
3. Place batteries into battery compartment aligned correctly.
4. Replace battery cover by sliding it closed. Do not use excessive force!
5. The scale is now ready for battery operation.
Note: Remove the batteries if you plan to store the scale for longer then 10 days.
