20
English
5. Initial use
1.
Please take the appliance out of the package and remove all the packaging
material.
2.
Please clean the appliance using a soft cloth to remove any production
residues.
Note: Some parts of the iron have been slightly greased, which is why the iron
may release some steam when used for the first time. After some time the grease
should evaporate and the iron should work as desired.
6. Temperature selection
1.
Check the ironing instructions on the garments to be ironed.
2.
Fabrics which have a kind of "Finish" (printed clothing) can be ironed at the
lowest temperature.
3.
If the fabric contains several types of fibres, always select the applicable
temperature when a product contains 60% polyester and 40% cotton, you
should always select the temperature that corresponds to polyester. Do not
use steam here.
4.
First classify the garments to be ironed based on the most suitable ironing
temperature: Wool with wool, cotton with cotton etc. Since the iron heats
up as quickly as it cools, start ironing the garments that require the lowest
temperature such as synthetic fibre articles. Keep the padding as smooth
as possible.
5.
Turn the temperature control knob till it points to the corresponding signal
as follows:
● Position for chemical fibres such as nylon and acetate
●● Position for wool, silk or mixtures, silk or mixtures
●●● Position for cotton or linen (steam)
7. Initial use
1.
Disconnect the plug of the iron.
2.
Set the steam switch to dry ironing (
).
