6
3.
GENERAL SAFETY AND ACCIDENT PREVENTION REGULATIONS
3.1
Operating personnel of the machine
The use of the machine is reserved for trained personnel.
Personnel must be familiar with the safety regulations and instructions for use.
3.2
Electrical hazard
Work on the power supply and access to live parts is permitted only by qualified
personnel and at their own risk. In any case, this access must be done with the device
disconnected from the mains supply.
3.3
Thermal hazard
Keep ventilation openings clear of obstacles.
Do not install the machine in the vicinity of flammable products.
3.4
Hazard arising from the use of gas
The use of gas for controlled atmosphere packaging is restricted to the use of N2
nitrogen or CO2 carbon dioxide or mixtures of both.
This machine is not designed for the use of Oxygen O2 or other flammable gases.
4.
INSTALLATION
Once the equipment has been received, the packaging will be carefully removed by checking
with the label (located on the back left) that it is the requested equipment. Once the
equipment has been checked, read this "Installation, use and maintenance manual" taking into
account the following precautions:
a)
Personnel responsible for installation must be qualified in the installation of
machinery.
b)
Check that the supply voltage/current is that required by the equipment.
c)
Grounding is mandatory.
d)
Check that the components of the equipment are correctly placed and undamaged
due to transport
Place the equipment on a flat surface and check that the machine is level.
The equipment must be positioned in such a way that it is protected against splashing water
and dirt.
Before starting up the equipment, check through the rear sight glass that the oil level is
between the MAX and MIN marks. If it is below the minimum, it must be filled in (see section
10 Maintenance).
