210208_A
mychefcooking.com
8
PRODUCT MANUAL STEAM CONDENSATION HOOD - DT.MP.CD.2103.2
In case of mounting the hood on several stacked Mychef ovens, the chimney of the lower
unit must be channelled and connected to the rear inlet of the condensing hood. To do this,
remove the plastic plug provided in the hood inlet and make the connection using a 40mm
inner Ø tube. See following picture for reference.
Figure 2. Hood connection in stacked ovens
5.2.
Electrical connection
Check that the voltage that reaches the point where the oven is going to be connected
coincides with the operating voltage of the equipment.
Before carrying out any electrical work, check that no electrical current is reaching the
equipment connection point.
Ensure an effective ground connection in all cases.
The wiring and other safety devices used for the electrical installation must have the
appropriate cross-section for the equipment in question.
