mychefcooking.com
PRODUCT MANUAL SNACK - DT.MP. SN.2202.2
24
Figure 13. Buttons and cooking phase indicators
If the indicator of a particular phase is lit and flashing, it means that this phase is being
displayed. If the indicator of a particular phase is lit continuously, it indicates that this phase
is activated. If the indicator of a particular phase is off, it indicates that this phase is
deactivated. For example, in the figure below, phase P1 is on and displaying, phase P2 is
on, and phase P3 is off:
Figure 14. Buttons and cooking phase indicators
To add a phase, with the oven not cooking, press the button with the inactive phase for two
seconds.
To delete a phase, with the oven not cooking, press the button with the active phase for two
seconds. Note that it is not possible to delete the first cooking phase P1.
To navigate between phases, lightly tap on the phase number you wish to view or edit.
6.1.3.
Start of the cooking cycle
Once the cooking parameters have been selected, either in manual mode or in a specific
programme, we can start the process.
To do this, press the START/STOP button lightly to start the preheating process (see 6.1.2.1).
If preheating is not necessary, the two central dots will flash every second, indicating that
the cooking process is in progress. If a parameter other than time is selected on the display,
the last dot will flash to indicate that cooking is in progress.
