Chapter 7 Related Documents
UD-series Screw Compressor
7.2 Parts Configuration Table 125*UD
7-11
The part code of the O-ring is the one assigned to NBR which is standard material.
When the material of the O-ring is other than NBR, a different part code is used for
each material.
If you are using O-rings made from other than the standard material, please contact
MAYEKAWA when placing an order.
The Code No. of parts
shown in parentheses below
is applied to the product until the
end of November, 2014:
(P/N 120 Unloader Indicator Assembly, P/N 125 Micro-Switch, P/N 129 Potentiometer)
For the Code No. of new type indicator part, refer to the separately dedicated
Instruction manual for it.
