2201Q4JE-MY-C9-N_2018.01.
Important Information
Compound 2-stage Screw Compressor 4032**C
iii
Important Information
Intended Use of This Product
This product is a general-purpose screw compressor for refrigeration, cold storage and various gases
compression. Do not use this product for any other purposes that are not intended for or which depart
from the specifications. For specifications of this product, refer to Section 2.3 "Compressor
Specifications" in this manual Chapter 2.
Please perform the maintenance items described in this manual by using safe and assured procedures.
Important Information for Safe Use of This Product
Although MAYEKAWA has paid a lot of attention to safety measures for this product, all hazards
including potential hazards caused by human errors, or due to environmental conditions can not be
anticipated.
As there are too many items to be strictly observed or prohibited when using this product, it is
impossible to inform all of them through this manual. Therefore, when operating this product, pay
extreme caution on personnel safety as well as on items described in this manual.
Important rules for safety work with this product that apply to all workers including managers and
supervisors are listed below.
Please read this manual before using this product. Fully understand the instructions provided there,
and be sure to perform the safety procedures described in this manual.
Operation, maintenance, and inspection of this product should be performed by qualified
personnel educated about the fundamentals of this product and trained about hazards
involved and measures to avoid danger.
Do not allow any person other than those educated on the fundamental expertise of this
product and trained about hazards involved and measures to avoid dangers to approach this
product while it is operating or during maintenance.
Observe all related federal/national and local codes and regulations.
To prevent accidents, do not carry out any operation or maintenance other than those
described in this manual. Do not use this product for any purpose other than intended.
Replace the parts with
genuine parts.
Not only workers but also managers should actively participate safety and health activities in
the workplace to prevent accidents.
When closing or opening a valve during work, make sure to apply lockout/tagout to prevent
the valve from being accidentally closed or opened during the work.
[Lockout] To lock with a key in order to keep people, except the workers involved, from
operating the product.
Lockout means disconnecting or keeping disconnected machines and devices by locking their
energy (power) sources. Lockout is not just simply turning off the power switches to stop the supply
of power, but includes immobilizing them with a key or similar device to keep any blocked switches
from being operated.
Lockout devices are devices such as keys, covers, and latches, to immobilize switches, valves,
opening and closing levers, etc., with a state of being locked.
[Tagout] To prevent any inappropriate work by hanging tag plates indicating "work in
progress".
Tagout means to clearly indicate, by hanging tag plates, that a device is in lockout and that
operation of the device is prohibited. Tag plates forbidding operation, starting, opening, etc. are
warnings clearly stating to not operate energy (power) sources, and are not for stopping blocking
devices.
