10
CAUTION -
PROPERTY
DAMAGE
►
Before you connect the appliance to the power supply,
check to ensure that the required input voltage as given on
the type plate tallies with that for the intended power source.
►
Check to ensure that the cable for the power lead 0
is not damaged and that it does not lead over hot surfaces
and/or sharp edges, otherwise it could be damaged.
►
Ensure that the cable for the power
O
is not over-taut or
kinked.
♦
Connect the power adapter
O
with the appliance by inserting
the barrel connector E) into the plug socket () at the rear side
of the appliance.
♦
Align the light surface
O
so that the flicker is visible on the
walls and/or ceiling.
♦
Connect the power adapter
O
into a
US
B power socket.
NOTE
►
It is best to check the location and alignment of the appliance
in the dark from outdoors and through the window. Only in
this way can you assess whether the appliance is aligned so
that it appears as if someone is watching television inside.
If necessary, realign the appliance.
MYD FTV
