10
Position and install the Rear Flange onto the
Mounting Base. Interlocking gears assure secure
positioning regardless of the rotation.
Insert one end of the controller cable into the
RJ45 jack on the back of the receiver assembly.
Insert the other end of the controller cable in the
MYE TV RJ45 port. See TV manual for additional
information.
A
B
C
Route the cable through the appropriate rubber
cable blocks A, B or C depending on where you
need the cable to exit the receiver flange.
Align and attach the controller assembly to the
Rear Flange using the Front Flange mounting
screws.
USE only MYE Entertainment cables with all MYE Entertainment receiver controllers. MYE Entertainment will not
be responsible for damage to controllers or cardio equipment when alternate or other cables are used.
Atta
ching the Controller – cont.
