9
USE only MYE Entertainment cables with all MYE Entertainment receiver controllers. MYE Entertainment will not
be responsible for damage to controllers or cardio equipment when alternate cables or power adapters are used.
Atta
ching the Controller
Wrap the Secure Grip Band around the intended
mounting pole and cut to fit. Do not overlap ends or
have a gap over 1/8”. Secure the Grip Band with 1
nylon tie in the center channel. OFFSET the knuckle of
the nylon tie from center by approximately 1/4”.
Trim
the excess nylon tie completely.
Install the Mounting Base over the nylon tie
knuckle. Insert two nylon ties into the holes
opposite the tie knuckle hole.
Seat the nylon ties into the corresponding
channels of the Secure Grip Band.
Pull the nylon ties tight to align all 3 tie knuckles.
Trim all excess nylon tie completely.
