INSTALLATION
2/4
OUTSIDE THE LUMINAIRE
LED test switch
LVU
-2/5
One 7/8" (22mm) hole with conduit
connector for 184600.
1. SPECIFICATION OF LVU-2/5
LVU-2/5 SPECIFICATION
2. INSTALLING THE LVU-2/5
The LVU-2/5 can be mounted inside or outside (nearby or on top of) the luminaire.
3. INSTALLING THE LED TEST SWITCH (LTS)
Select a convenient location for the LTS so that it can be seen after installation.
Drill a 1/2"(12 mm) hole for mounting the LTS. Connect the wires from LTS to the
LVU-2/5 model according to the wiring diagram on page 3.
INSIDE THE LUMINAIRE
LVU
-2/5
LED test switch
CAUTION: MAKE CERTAIN THE AC POWER IS OFF AND THE LVU-2/5 UNIT CONNECTOR IS
DISCONNECTED UNTIL THE INSTALLATION IS COMPLETE.
LVU-2
LVU-5
Output
Output Power
Voltage
Model
Input
277V/50Hz
120V/60Hz
25W
50W
277V/60Hz
120V/60Hz
WWW.MYERSEPS.COM
