Using the MyEssentials Wireless Networking Utility
22
WEP Setup
64-Bit WEP Encryption
1.
Select “WEP” from the “Data Encryption” drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your key by
typing in the hex key manually.
A hex (hexadecimal) key is a combination of numbers and letters from
A–F and 0–9. For 64-bit WEP, you must enter 10 hex keys.
For instance:
AF
0F
4B
C3
D4
= 64-bit WEP key
3.
Click “Save” to finish. Encryption in the wireless router (or access
point) is now set. Each of your computers on your wireless network
must now be configured with the same security settings.
WARNING:
If you are using a wireless client to turn on the security
settings in your wireless router (or access point), you will temporarily
lose your wireless connection until you activate security on your wireless
client. Please record the key prior to applying changes in the wireless
router (or access point). If you don’t remember the hex key, your client
will be locked out of the wireless router (or access point).