Valid range of this parameter is [0,100].
VBISetting:
VBI Level
VER:V1
Exit
Choose V1 to work with old MFD products (MFD AP, MFD TeleFlyPro).
Choose V2 to work with new MFD products(MFD Crosshair AP, MFD TeleFlyTiny. You can also
choose V1 for Crosshair/TeleFlyTiny with their own menu).
This is about how to use the analog video to carry flying information.
MFD devices can encode information to the analog video signal.
The tracker will extract necessary information from it. V2 works better in long range.
Protocol:
Protocol
ALT=BARO
Exit
Choose ALT=BARO or ALT=GPS to determine what altitude data of the MAVLink data stream will
be used to track. We will discuss this in the chapter "5.
Downlink
".
TrackerID:
TrackerID
ID=1
Exit
Choose the numeral ID of the tracker. When you use "FlyTogether" function, your ID will be
displayed on other's OSD screen. You need a unique ID when you joining a "FlyTogether" CAN-Bus
network.
The valid range is [0,9]
SysInfo:
SysInfo
Ver.:1.83
2:21.8.23
12:40:22
Hw:1
Exit
This screen shows version number of the firmware (1.83) and Hardware (1)
Factory
:
Test
YawTest