Crossbow AAT requires =12V to 16V (3S~4S) DC power supply. The recommended power supply
solution is 2 x NP-F980 batteries (7.4V 6600mah).
The tracker is powered on by simply plugging the XT60 connector into the corresponding power
socket of the AAT, as shown in the picture:
2. The antenna has to be mounted on the Crossbow AAT with the use of a special bracket.In order
to prevent tampering with the normal operation of the compass built into the Crossbow AAT it is
recommended to avoid using antennas made with ferromagnetic materials. Wherever possible,
use non-magnetic stainless steel bolts, aluminum and other non-magnetic materials.