4
C.
SAFETY TIPS AND PRELIMINARY CHECKS
Before installing the automation, remove all unnecessary packaging and
accessories;
Check that door opens and closes easily and that mechanical parts are in
good condition and correctly balanced;
When installing make sure the manual release string is left less than 1,8 m
length;
Fixed start commands must be within the door area but safely far from
moving parts, at minimum height of 1,5 m from ground.
Visible permanent warnings of entrapment must be fitted.
The emergency release system must be clearly permanently visible;
Once installation is complete, make sure the opener is properly adjusted
and reverses during closing if an obstacle is encountered at least 40 mm
from ground;
Make sure door does not obstruct public sidewalks or roads during
operation;
Once installation is completed, make sure the opener stops during opening
if an obstacle is encountered. Put a 20 kg load in the centre of the door on
the lower side to test the reaction of the system.
CAREFULLY FOLLOW MOUNTING INSTRUCTIONS
.
AN IMPROPER INSTALLATION MAY CAUSE SEVERE INJURIES!
rev0
2
_19
