1. Unscrew the lancing device tip
and insert a lancet firmly into
the carrier.
2.Pinch the lancet and twist
off the protective cover. Do
not discard the cover.
3.The tip of the lancing device offers
5 different levels of skin penetration,
to select the best depth: Use1-2 for
soft or thin skin, 3for average skin,
4-5 for thick or calloused skin.
4. Hold the tip in one hand and pull
on the sliding barrel with the other
hand. Pull the end apart and you will
feel a click. This indicates that the
lancing device is in a locked position
ready for lancing.
①
②
③
④
⑤
⑥
5. Release the sleeve. It will automati
cally contract and move back to its
original position near the trigger
hub.
6. Place the lancing device against
the tip of the finger. Press the
trigger button. Your blood sample
should now be ready to be applied
on the test strip. Lift the lancing
device out and away.
Collecting a Drop of Blood
Alarm
INPUT the number of desired ALARMS.
Enter button.
# Available to set Max 5 alarm function and new 3 average dates.
Alarm
<Caution>
1. Without setting the date properly, the average glucose level and the results in
memory will not show proper values. It is recommended to set the meter before
use and when new batteries are installed.
2. Yon can
’
t test your blood glucose while in the setting mode.
3. You will be unable to test while setting up your meter.
Year Mode : From 2006 to 2099
18
myglucohealth
TM
Blood Glucose Monitoring System
myglucohealth
TM
Blood Glucose Monitoring System 19
